Frame mounted rocker guards provide you with the maximum amount of rocker protection and help eliminate body damage.

Aftermarket long arm rear suspensions reposition the location of the rear lower control arm mounting brackets at the frame. This may interfere with weld-on frame mounted rocker guards. Our MB1259 Frame Mounted Rocker Guards for Long Travel Suspensions is designed to help solve this issue.

Our kit includes a pair of expertly crafted and fully welded rocker guards with the rear most frame mounting connections removed. We supply loose tubes, plates and gussets so you can fit, weld and install your rear frame mounting connections around many aftermarket long arm suspension brackets with relative ease.

The tube slider portion of the Gladiator frame mounted rocker guards is 2 inch DOM steel tubing. The end caps and and center bracing are fabricated like the frame mounts from heavy duty 3/16 inch thick laser cut and formed steel plate

Our step-by-step instructions will guide you through the entire installation process.

Fits:

• 2020-Present Jeep Gladiator JT

Notes:

• 2019-2020 JT's with 3 bolt transmission cross members on the passenger side frame rail will require the base of the mounting bracket to be trimmed to fit.
• Should be installed by a qualified welder/fabricator
• Ships bare metal and must be painted or powder coated before use
• If you are not running a long arm suspension, then you can use our standard frame mounted rocker part number MB1193
• Always disconnect your battery cables before welding in your vehicle.